Pages Menu
Categories Menu

800 Series – Acoustical (STC) Door


800 Series Acoustical (STC) Door 5 & 7 – Ply

Hardwood Veneer / MDO / HDF or High Pressure Decorative Laminate (HPDL)

WDMA/AWS: BR – Special Function Doors – STC-36, 39, 40, 42, or 43

Door sizes: (Non rated) 1-3/4” – 2-1/4” thick, up to 4’ wide x 8’ high (Check with sales for larger doors).

Warranty: Lifetime for interior use only. See Vancouver Door Warranty.

Blocking Options: For undercutting and specialized hardware. Must be specified if required.
See “Blocking Adds” page

Available Rating Options For 800 STC

Fire Ratings


STC Ratings

  • Levels vary from STC-36 to STC-43
  • Lites – Recommended glazing systems must be used to obtain the maximum STC rating which may conflict with fire rating requirements.

Currently not tested or approved for pairs or doors with transoms.

See the STC Transmission Information.

LEED Credits

  • MR 4.1 – Recycled Content: 10%
  • MR 4.2 – Recycled Content: 20%
  • EQ 4.4 – Low Emitting Materials – No Added Urea Formaldehyde (NAUF)
  • Low VOC’ s on all finishes.
  • All products conform to “CARB” Phase II requirements.

See our “LEED” Matrix for additional information.

*Note: Each STC rated door requires a specific sealing system to maintain the rating. We can supply a complete system or you may supply as long as the system conforms to the test data. Check with our technical department.

Sized, beveled & machined for just about any specified surface, mortised or electrified hardware and Prefinished.

Click here to download PDF version.

Vancouver Door Company, Puyallup WA.

Acoustical or Sound Resistant doors are tested in accordance with ASTM E90, E413 & E1332. The operable tests give the result s of Sound Transmission Loss and the determination of the Sound Transmission Class (STC) for door systems.
These doors can be specified for a number of applications where noise reduction is required. Typical applications for this type of door are: Meeting or classrooms, band rooms, auditoriums, hotel rooms, etc.
More information can be obtained on the “Sound transmission infor- mation” section of our website.
Options available
Applied molding, overlays, sketch face and hardware machining.