Hardware & Machining
Pre-fitting and edge beveling
Veneered or plastic laminate edges to match faces
Doors can be prepared for any standard or custom hardware.
Precision factory machining and pre-fitting ensure proper hardware
preparation for tolerances specified by National Fire Protection
Association (NFPA), the Architectural Woodwork Standards (AWS),
the Window and Door Manufacturers Association (WDMA) and the
Door and Hardware Institute (DHI).
Some of our machining options include:
• Concealed Vertical Rods (Less Bottom Rod – LBR)
• Raceway’s (Wire-chases)
• Concealed hinges, Anchor hinges, Pivot hinges
• Mortised door bottoms
• Mortised edge guards
Our expert staff can coordinate your projects to ensure a smooth
installation of hardware to doors.
Wood and wood veneered jambs in many species. Side light jambs are also available.
Available non-rated, 20 to 90 minute rated.
Positive Pressure “S” label available in 20 to 90 minute singles and pairs.
20 minute rated wood jambs in sizes up to 4’x9’ singles and 8’x9’ pairs.