A-Series Agrifiber Core 520A/530A
Solid Core 520A/530A – Agrifiber Core (AC) 3, 5 & 7-Ply
Hardwood Veneer / MDO / HDF or High Pressure Decorative Laminate (HPDL)
WDMA: PC-5 / PC-HPDL 3 or 5 Bonded core
AWS: PC-5 / PC-HPDL 3 or 5 Bonded core
WDMA: PC-7 – Bonded core
AWS: PC-7 – Bonded core
Unless specified otherwise all doors are constructed to Extra Heavy Duty performance levels.
Door sizes: (Non rated) 1-3/8” – 2-1/4” thick, up to 6’ wide x 12’ high (Check with sales for taller doors).
Warranty: Lifetime for interior use / one year limited exterior, fully type 1 wood or MDO faces only. See Vancouver Door Warranty.
Blocking Options: For undercutting and specialized hardware. Must be specified if required. See “Blocking Adds” page
Available Rating Options For 520A
Fire Ratings
- 20 Minute: Neutral Pressure (NP) or Positive Pressure (PP) – Cat “A” or “B” and intumescent free. Smoke & Draft control label.
| Max Sizes: | NP | PP |
| Singles: | 4’ x 10’ | 4’ x 9’ |
| Std Pairs: | 8’ x 10’ | 8’ x 9’ |
| Dbl Egress: | 8’ x 10’ | 8’ x 9’ |
- Transoms—Up to 4’ x 3’4”
- Vision lites (louvers not allowed)
- Applied moldings, Quirks & Inlays.
- See the “20 Minute” rating matrix and specificaitons sheet for hardware, frame and other information on ratings
STC Ratings
- Standard construction = STC-28 to STC-33.
- Lites – Recommended glazing systems must be used to obtain the maximum STC rating.
- Pairs or doors with transoms may require additional sealing / gasketing systems.
- “U” value = 0.46 (unglazed). Glazed doors vary based on glazing type. See “Default U factors for doors” matrix.
See the STC Transmission Information
LEED Credits
- MR 4.1 – Recycled Content: 10%
- MR 4.2 – Recycled Content: 20%
- EQ 4.4 – Low Emitting Materials – No Added Urea Formaldehyde (NAUF)
- Low VOC’ s on all finishes.
- All products conform to “CARB” Phase II requirements.
See our “LEED” Matrix for additional information.
Available Construction Options For 520A
- Dutch Door (various shelf types available) See “Dutch shelf options”.
- Wicket Door (Shelf upon request)
- Pairs, Set matches & Bifolds.
- Over-size doors & Splined sets.
- Full or Half louver – Non rated.
- Vision Lites – Various shapes & sizes. Glazed or unglazed.
- Arc or radius top to match jamb.
Sized, beveled & machined for just about any specified surface, concealed or electrified hardware and Prefinished.
Click here to download PDF version.